聚对苯二甲酸乙二酯微流控芯片的制备和表面改性

高聚物微流控芯片具有制备简单、成本低、可批量生产等突出优点而有望成为一次性器件,近年来在国内外引起了同行们的兴趣.但是,高聚物表面的憎水性、对有机分子的强吸附性、电渗流的不稳定性等又成为高聚物芯片在微流控分析领域得以广泛应用的障碍.表面改性是改善高聚物芯片分析特性的有效途径.     

Traceless solid-phase synthesis of nitrogen-containing heterocycles and their biological evaluations as inhibitors of neuronal sodium channels

The preparation of pyrimidine-2-thione, pyrimidine-2-one, pyrimidine, and benzo[b][1,4]diazepine derivatives using traceless solid-phase sulfone linker strategy is described. Key steps involved are (i) sulfinate S-alkylation, (ii) sulfone anion alkylation with an epoxide, (iii) gamma-hydroxyl sulfone --> gamma-ketosulfone oxidation, and (iv) traceless product release by a one-pot elimination-cyclization process. Elimination-cyclization was carried out under basic conditions with thiourea, methyl thiourea, methyl urea, guanidine hydrochloride, benzamidine hydrochloride and ortho-phenylene diamine. Twenty-three compounds were prepared, and 14 of them were evaluated by the Batrachotoxin (BTX) radioligand binding assay for their binding affinity to neuronal sodium channels. Compound 7c was found to be a potential neuronal sodium channels blocker.     

自由体积与亲水性对环氧涂层防护性能的影响

报道了涂层聚合物自由体积和亲水性对涂层腐蚀防护性能影响的初步研究结果.实验表明,相对于自由体积,树脂的亲水性是决定树脂吸水率的更主要因素.低亲水性涂层腐蚀防护性能的提高主要源自到达涂层/金属界面的水量的显著降低.但由于采用活性酯固化的环氧树脂涂层中水通道的尺寸相对较大,水合离子扩散较容易,因此该类涂层覆盖下的金属基体被润湿部分的腐蚀趋势反而较一般涂层为大.     

流动注射双安培法测定多巴胺

通过偶合多巴胺在铂电极上的氧化和高锰酸钾在铂电极上的还原,建立了一个不施加电压的条件下的流动注射双安培法直接测定多巴胺的新方法。以0.05 mol/L硫酸为载液,多巴胺的氧化峰电流与其浓度在0.8~160 mg/L范围内呈线性关系,线性回归方程为i(nA)=652.9C-239.2(r=0.9998,n=10),检出限为0.2 mg/L;RSD为2.86%(N=80 mg/L,n=14);进样频率为80次/h。本方法具有很高的选择性和灵敏度,样品处理方法简单快速,适于连续自动测定。用于实际样品的测定,结果满意。     

A novel synthetic route to 2-alkylpropane-1,3-sultones and its application to the synthesis of 2-alkyl derivatives of tramiprosate

A practical synthetic route to various 2-alkylpropane-1,3-sultones, the key intermediates for the preparation of 2-substituted homotaurines as analogs of tramiprosate, was developed.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

黄烷类衍生物的合成及其生物活性研究

An efficient and feasible synthetic approach was developed for the synthesis of an array of new flavane derivafives from the substituted benzaldehyde with the reduction of chalcones and subsequent cyclization as the key steps. The purity and structure of the products were confirmed by the elemental analysis and a combination of its IR, ^1H and ^13C NMR, and mass spectra. These synthetic compounds were tested for xanthine oxidase （XO） inhibitions and antifungal actions against Candida albicans, Cryptococcus neoformans, Aspergillus sp. and Trichophyton rubrum. 7-Hydrazinocarbonylmethoxy-4＇-methoxyflavane （9） was found to be the most XO inhibitory with IC50=76.4 μmol/L, and the most potent antifungal compound was 4＇-hydrazinocarbonylmethoxyflavane （12） with minimal inhibition concentration MIC=8 μg/mL against Trichophyton rubrum.     

A study on the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds for bone tissue engineering

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite had been in situ combined into chitosan scaffolds. The bioactivity of the composite scaffolds was studied by examining the apatite formed on the scaffolds by incubating in simulated body fluid and the activity of preosteoblasts cultured on them. The apatite layer was assessed using scanning electronic microscope (SEM), X-ray diffraction (XRD), Fourier-Transformed Infrared spectroscopy (FTIR) and weight measurement. Composite analysis showed that after incubation in simulated body fluid on both of the scaffolds carbonate hydroxyapatite was formed. With increasing nano-hydroxyapatite content in the composite, the quantity of the apatite formed on the scaffolds increased. Compared with pure chitosan, the composite with nano-hydroxyapatite could form apatite more readily during the biomimetic process, which suggests that the composite possessed better mineralization activity. Furthermore, preosteoblast cells cultured on the apatite-coated scaffolds showed different behavior. On the apatite-coated composite scaffolds cells presented better proliferation than on apatite-coated chitosan scaffolds. In addition, alkaline phosphatase activities of cells cultured on the scaffolds in conditioned medium were assessed. The cells on composite scaffolds showed a higher alkaline phosphatase activity which suggested a higher differentiation level. The results indicated that the addition of nano-hydroxyapatite improved the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds. On the other hand, that is to say composition of substrates could affect the apatite formation on them, and pre-loaded hydroxyapatite can enhance the apatite-coating. It will also be significant in preparation of apatite-coating polymer scaffolds for bone tissue engineering.     

MECHANICAL PERTURBATION INDUCED MOLECULAR ALIGNMENTS IN A SIDE-CHAIN LIQUID CRYSTALLINE POLYACETYLENE, POLY{10-[4-(4''-METHOXYPHENOXY-CARBOML)PHENOXYCARBONYL]-1-DECYNE}*

A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily "tunab1e" by simple mechanical perturbation. Thepolymerization of 10- [ 4 - (4' -methoxyphenoxycarbonyl )phenoxycarbonyl] - 1 -decyne (4 ) in itiated by theWCl_6-Ph_4Sn/dioxane complex yields polymer 5 with a M_w of 28400. The molecular structure of 5 ischaracterized by NMR, IR, and UV spectroscopy and its liquid crystalline behavior is investigated by DSC,POM, and XRD analysis. Upon mechanical perturbation, 5 exhibits unusual agitation-induced high-strengthdisclinations, shear-induced inversion walls, and solidification-induced banded textures. Such phenomenahave been observed in the main-chain liquid crystalline polymers with rigid backbones, but have seldom beenreported for the side-chain liquid crystalline polymers with flexible backbones, suggesting that the rigidpolyacetylene backbone of 5 plays a constructive role in inducing the novel molecular alignments.     

Chelate synthesis of 2,2′-bipyridin-4-one

A method for the synthesis of 2,2′-bipyridin-4-one from 4-amino-4-(2-pyridyl)-but-3-en-2-onevia its diphenylboron, chelates was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2071–2073, November, 1997.